How to Root and Install TWRP on Redmi 4

Do yo want to Root Redmi 4 and Install TWRP?  if yes then you are at right place. Today we are here with the Guide to easily root redmi 4. Redmi 4 has been  followed by India and  some other countries. For this device, you can have different options to choose: 2G, 3G, and 4G VoLTE network. Also, two types of Xiaomi Redmi 4 can be offered: 2GB + 16GB. It runs on MIUI 8 based Android 6.0.1 Marshmallow and its powered by a 4100mAh non-removable battery. Redmi 4 powered by Snapdragon 435 and it has Fingerprint sensor.

Root Redmi 4

No matter which version you choose, all of you get the same point: How to Root Xiaomi Redmi 4 and Install TWRP. So let’s start the Guide to Get root access on Redmi 4 and Install TWRP.

Before proceeding to the rooting guide below are some pre-requirements make sure you follow all of theme.

  1. Make Sure bootloader is Unlocked.
  2. Make sure you have 70% charge of more then that.
  3. Follow all steps correctly otherwise you will end up with a bricked phone.
  4. We are not responsible for any damage to redmi 4.
  5. This rooting and TWRP installation Process is only for Redmi 4.
********** Files Needed For Process **********
   ADB Tool 

 TWRP Recovery img

Steps To Install TWRP on Redmi 4

#1. First of all enable the USB debugging option in developer options.

#2. to enable USB debugging Go to Setting -> About Phone -> Now Tap on Miui version 7 times until you see a message on screen like ” You Are Now A Developer”

#3. Now  you have developer option, so go to Settings-> Developer Options -> Enable USB debugging and also enable OEM unlock.

#4. Now Install ADB Tool on your PC or Laptop.

#5. Go to folder where you installed the ADB Tool. If you dont know where is the Folder just go to my computer -> Local Disk (C;) -> Adb.

#6 Open the Adb folder and by holding the Shift Key and right-click on any blank space and select “Open Command Windows Here.”

#7 Now connect your Redmi 4A to Laptop or PC using USB Cable. and reboot phone into fastboot mode by using the following command.

adb reboot bootloader

#8 Now your device will reboot into Fastboot mode. If it does’t work. check out the below problems.

  1. Your USB cable is connected properly.
  2. you have drivers installed.

#9 check a list of connected Device by using the following command.

fastboot devices

#10 TWRP recovery you need to recovery.img and place it in ADB Folder. Now you need to flash the TWRP recovery. To flash the recovery, Use the following command.

fastboot flash recovery recovery.img

That’s it! Now you have installed TWRP recovery on redmi 4A.

Now Time to Root Redmi 4

How To Root Redmi 4 Using TWRP 

#1. Move the to Your phone’s internal storage. ” Don’t put the File in any Folder”

#2 Now you have to boot your phone in TWRP recovery mode.

#3 to boot redmi 4 in recovery. First of all turn off your smartphone. Now press Volume UP + Power button together until the redmi note 4 boots in TWRP recovery mode.

TWRP Recovery Mode

#4 Now first make backup of your all data using TWRP.

#5 Now tap on install, And choose the file.

#6 Now swipe to install

Also Read :-  Root and Install TWRP on Redmi 4A

That’s it Now you have rooted and installed TWRP recovery on your redmi 4.

So this was our guide on How to Root Redmi 4 and install TWRP recovery. i hope this guide helped you.

How to Root and Install TWRP on Redmi 4
Rate this post

About the author

Ashish Patel

Hey, Guys, It’s Ashish, Founder of Android Jungles. I spend most of my free time creating content for my YouTube channeland this website.
I started my YouTube channel at age 20 and my goal was to teach people what they can do with their gadgets.