In this Guide, you will be able to learn How to install TWRP Recovery on Gionee A1. Today we are here with guide of How to Install TWRP Recovery On Gionee A1. Gionee is mostly Focus on Selfie Camera. Gionee A1 packs with a MediaTek MT6755 Helio P10 and 4GB of RAM. Gionee A1 comes in 64GB of On board Storage. Gionee A1 powered by 4010mAh battery.
So Today we are sharing How to Install TWRP Recovery on Gionee A1.
Before proceeding to the installation guide below are some pre-requirements make sure you follow all of theme.
Also Read:- How to root Gionee A1 Without PC.
Advantages after you installed TWRP Recovery on Gionee A1
#1. You will be able to update your android Phone to Latest version of Android.
#2. You will be able to customize Your Smartphone.
#3. You will able to flash ROMs and zip files.
#4. You will be able to root your Gionee A1 using TWRP Recovery.
Disadvantages after you installed TWRP Recovery on Gionee A1
#1. Warranty will be voided after installing TWRP Recovery.
#2. May be brick your Phone by flashing wrong zip files.
- Make Sure bootloader is Unlocked.
- Make sure you have 70% charge of more then that.
- Follow all steps correctly otherwise you will end up with a bricked phone.
- We are not responsible for any damage to Gionee A1.
- This TWRP Installation Process is only for Gionee A1.
********** Download **********
Steps To Install TWRP on Gionee A1.
#1. First of all enable the USB debugging option in developer options.
#2. to enable USB debugging Go to Setting -> About Phone -> Now Tap on Build Number until you see a message on screen like ” You Are Now A Developer”
#3. Now you have developer option, so go to Settings-> Developer Options -> Enable USB debugging and also enable OEM unlock.
#4. Now Install ADB Tool on your PC or Laptop.
#5. Go to folder where you installed the ADB Tool. If you dont know where is the Folder just go to my computer -> Local Disk (C;) -> Adb.
#6 Open the Adb folder and by holding the Shift Key and right-click on any blank space and select “Open Command Windows Here.”
#7 Now connect your Gionee A1 to Laptop or PC using USB Cable. and reboot phone into fastboot mode by using the following command.
adb reboot bootloader
#8 Now your device will reboot into Fastboot mode. If it does’t work. check out the below problems.
- Your USB cable is connected properly.
- you have drivers installed.
#9 check a list of connected Device by using the following command.
#10 TWRP recovery you need to recovery.img and place it in ADB Folder. Now you need to flash the TWRP recovery. To flash the recovery, Use the following command.
fastboot flash recovery recovery.img
That’s it! Now you have installed TWRP recovery on Gionee A1.
So this was the Guide on How to install TWRP Recovery on Gionee A1. If you have Any Question you can leave comment Down below.