In this Guide, you will be able to learn How to install TWRP Recovery on Gionee A1 Lite . Today we are here with guide of How to Install TWRP Recovery on Gionee A1 Lite. Gionee A1 Lite comes with a 5.3-inch with an HD 720p resolution display. The A1 Lite is powered by a 1.3GHz MediaTek MT6753 64-bit Octa -Core chipset and a Mali-T720MP3 GPU. Gionee A1 Lite has 3GB of RAM and 32GB on-board storage with expansion up to 64GB.
So Today we are sharing How to Install TWRP Recovery on Gionee A1 Lite.
Before proceeding to the installation guide below are some pre-requirements make sure you follow all of theme.
Also Read:- Root Gionee A1 Lite Without PC.
- Make Sure bootloader is Unlocked.
- Make sure you have 70% charge of more then that.
- Follow all steps correctly otherwise you will end up with a bricked phone.
- We are not responsible for any damage to Gionee A1 Lite.
- This TWRP installation Process is only for Gionee A1 Lite.
********** Download **********
Steps To Install TWRP on Gionee A1 Lite.
#1. First of all enable the USB debugging option in developer options.
#2. to enable USB debugging Go to Setting -> About Phone -> Now Tap on Build Number until you see a message on screen like ” You Are Now A Developer”
#3. Now you have developer option, so go to Settings-> Developer Options -> Enable USB debugging and also enable OEM unlock.
#4. Now Install ADB Tool on your PC or Laptop.
#5. Go to folder where you installed the ADB Tool. If you dont know where is the Folder just go to my computer -> Local Disk (C;) -> Adb.
#6 Open the Adb folder and by holding the Shift Key and right-click on any blank space and select “Open Command Windows Here.”
#7 Now connect your Gionee A1 Lite to Laptop or PC using USB Cable. and reboot phone into fastboot mode by using the following command.
adb reboot bootloader
#8 Now your device will reboot into Fastboot mode. If it does’t work. check out the below problems.
- Your USB cable is connected properly.
- you have drivers installed.
#9 check a list of connected Device by using the following command.
#10 TWRP recovery you need to recovery.img and place it in ADB Folder. Now you need to flash the TWRP recovery. To flash the recovery, Use the following command.
fastboot flash recovery recovery.img
That’s it! Now you have installed TWRP recovery on Gionee A1 Lite.
So this was the Guide on How to install TWRP Recovery on Gionee A1 Lite. If you have Any Question you can leave comment Down below.